6. Network Connections
You can use one of the methods below to connect the camera to the network.
Router or LAN connection
This is the most common connection in which the IP camera is connected to a router and allows multiple
users on and off site to see the IP camera on a LAN/WAN (Internet). The camera must be assigned an IP
address that is compatible with its LAN. By setting up port forwarding on the router, you can view cameras
from outside of the LAN via the Internet. To remotely access the Web interface of the IP camera, please
refer to 7.3.2 DDNS in the User's Manual. To set up port forwarding, please consult the manual of the
router.
Right: Pinout of a straight‐through cable.
Straight‐through LAN patch cable
7
EPN Series