The Record Type - EverFocus EDN Series User Manual

7.3.2 The Record Type

You can set up the recording settings on this page.
Select Enable to display the following settings. Select Disable will hide the settings.
Note: If the schedule record is enabled, the Event function (see 7.5 Event) will be automatically
disabled. You can only use either schedule record or the event record.
【The Schedule Mode】You can set up the record schedule. Please select a desired recording
schedule mode (Every day / Week day / Schedule date) for setting a record start / end time and date.
Every day: Enter a desired start / end time for everyday recording.
Week day: Enter a desired start / end time and select desired week days for recording.
Schedule date: Select a desired start / end day and enter a desired start / end time for recording.
【Record Parameters】You can configure the recording source video stream, recording interval and
file name.
Source: Select the desired video stream. The video stream can be configured in 7.2.2 Streaming.
The Recording Interval: The user can limit the size of each recording file here (in minutes). When a
single recording file exceeds the time you set, the system will create a new file to save that data to.
Record Prefix File Name: Enter a name for the recording files. The maximum length is 20 digits.
Enable cyclic recording: Check the box for overwriting recording file when the storage capacity is
full.
41
EDN2160/2260/2560