Accessing The User Interface; Checking The Dynamic Ip Address - EverFocus EDN Series User Manual

5. Accessing the User Interface

This section explains how to access the Web interface of the camera for configuration.

5.1 Checking the Dynamic IP Address

You can look up the IP address and access the Web interface of the camera using the IP Utility (IPU)
software included in the software CD. Please connect the IP camera in the same LAN of your computer.
1. Install and then start the IPU program
automatically search the IP devices connected in the LAN.
2. Double click the IP address of the desired device, the login window pops up. Type the user ID and
password to log in. By default, the user ID is user1 or admin and the password is 11111111.
, the following IPU window appears. The IPU will
12
EDN2160/2260/2560