EverFocus EDN Series User Manual page 14

5. Press the Release Button to remove the cover and then:
a. Adjust the camera Pan / Tilt angles.
b. Optionally insert a micro SD / SDHC card to the card slot.
Micro SD / SDHC Card Slot
6. Connect the network and power cables to the camera.
7. Place the dome cover back by aligning the Cut-Out with the Release Button. Press the dome cover
for it to snap into place. A "click" sound should be heard when installed properly.
8. Screw the camera to the Mounting Plate using the supplied Fix Screw.
Release Button
Cut-Out
Release Button
8
EDN2160/2260/2560
Tilt: 70°
Pan: 200°