EverFocus EDN Series User Manual page 55

【Video motion detection】Select this to configure areas in which motion will be detected by the
camera. Up to 16 areas can be configured.
To set up a motion area,
1. Drag the gray frame to a desired place and size.
2. Set up the following settings:
Windows Name: Type a name for the motion area.
Object Size: Slide the bar to set up the size of object which will be detected or not when it enters
the configured motion area. This function is designed to prevent false detections caused by small
objects.
Sensitivity: Set up the motion sensitivity for the grids. The larger the number, the higher the
sensitivity.
3. Detect next event after __ second(s): Enter the time for the camera to detect the next event
after the configured given time. Please note that you need to enter more than 3 seconds.
Click New to create a new motion area. Click Delete to delete the motion area. Click Save to save the
configured motion areas.
【Periodically】Select this to enable the camera to trigger actions periodically.
Detect next event after __ second(s): Enter a time for the camera to record after the configured given
time. Please note that you need to enter more than 3 seconds.
49
EDN2160/2260/2560