7.2.1.3 WDR Setting
The WDR (Wide Dynamic Range) function provides clearer images when both of the very bright
and dark areas simultaneously appear on the camera view. Select Enable to enable the WDR
function. Slide the bar to adjust the WDR level. Click Apply to apply the changes or Cancel to
cancel the changes and return to the previous settings.
7.2.1.4 Infrared LED Setting
You can turn on/off the built-in IR LEDs. This function is very useful when the camera is installed
under low illumination environment.
Mode of infrared led: Select Automatic and adjust the sensitivity between 0 and 4, the IR LED
will be automatically turn on based on the detected light level. Select Manual to manually
turn on/ off the IR LED.
Low lux mode: This function will improve the video quality when the environment is under
low lux. Select Turn on/Turn off to enable/disable the function. Use the slider to adjust the
value.
37
EDN2160/2260/2560