5.5 Switching Streams
The Streaming function allows users to switch between Main and Sub streams on the Live View. You can set
up the Main stream and Sub stream to the Local or Remote connection type respectively. To enable the
stream switching function on the Live View window, you have to configure the camera stream settings first
(see 7.2.2.1 Video Codec Setting).
After configuring the camera stream settings, you can start using the Stream Switching function on the Live
View window. Click the Streaming icon on the Live View window, the following switching buttons appears.
5.6 Digital Zoom Window
Click the PTZ icon on the Live View window to operate the Digital Zoom function.
1.
Select a connection type by clicking the Remote or Local button.
2.
Select Main or Sub stream for the pre-setup Remote / Local type.
3.
You can optionally click Picture to display the Live View in MJPEG codec.
Digital Zoom
Click the Digital Zoom button and the Digital Zoom control window appears.
Check Enable digital zoom to enable the Digital Zoom function. Slide the
zoom factors bar to adjust the zoom size (Navigation Box size). You can then
use your mouse to drag and move the Navigation Box around to have a
close-up view within the area.
Navigation Box
22
EDN2160/2260/2560