Mld Group Information - Planet XGSW-28040HP User Manual

L2+ 24-port 10/100/1000mbps 802.3at poe + 4-port 10g sfp+ managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for XGSW-28040HP:
Table of Contents

Advertisement

 Port
 Status
Buttons
: Click to refresh the Page immediately.
: Clears all Statistics counters.
Auto-refresh
: Automatic refresh occurs every 3 seconds.

4.8.14 MLD Group Information

Entries in the MLD Group Table are shown on this Page. The MLD Group Table is sorted first by VLAN ID, and then by group.
Each Page shows up to 99 entries from the MLD Group table, default being 20, selected through the "entries per Page" input
field. When first visited, the web Page will show the first 20 entries from the beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD Group Table. The MLD
Groups Informatino screen in
The Page includes the following fields:
Object
VLAN ID
 Groups
 Port Members
switch that leads towards the Layer 3 multicast device or MLD querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port.
Switch port number.
Indicates whether specific port is a router port or not.
Figure 4-8-17
appears.
Figure 4-8-17: MLD Snooping Groups Information Page Screenshot
Description
VLAN ID of the group.
Group address of the group displayed.
Ports under this group.
User's Manual of XGSW-28040HP
169

Advertisement

Table of Contents
loading

Table of Contents