The screen in Figure
4-16-6
Please press Add New Rule button to start set PoE Schedule function. You have to set PoE schedule to profile then go back to
PoE Port Configuration, and select "Schedule" mode from per port "PoE Mode" option then you can indicate which schedule
profile could be apply to the PoE port.
The page includes the following fields:
Object
Profile
Week Day
Start Hour
Start Min
End Hour
End Min
Reboot Enable
appears.
Figure 4-16-6: PoE Schedule Screenshot
Description
Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
Allows user to set week day for defining PoE function should be enabled on the day.
Allows user to set what hour does PoE function enables.
Allows user to set what minute does PoE function enables.
Allows user to set what hour does PoE function disables.
Allows user to set what minute does PoE function disables.
Allows user to enable or disable whole PoE port reboot by PoE reboot schedule.
Please be noticed that if you want to PoE schedule and PoE reboot schedule work
at the same time, please use this function, and don't use Reboot Only function.
User's Manual of XGSW-28040HP
324