Power Over Ethernet Configuration - Planet XGSW-28040HP User Manual

Class Usage
Default
0
Optional
1
Optional
2
Optional
3
Optional
4
1.
2.

Allocation mode
In this mode the user allocates the amount of power that each port may reserve. The allocated/reserved power for each
port/PD is specified in the Maximum Power fields. The ports are shut down when total reserved powered exceeds the
amount of power that the power supply can deliver.
In this mode the port power is not turned on if the PD requests more available power.

LLDP mode
In this mode the ports of PoE power is managed and determined by LLDP Media protocol.

4.16.3 Power Over Ethernet Configuration

This section allows the user to inspect and configure the current PoE configuration settings
appears.
The page includes the following fields:
Range of maximum power used by the PD
0.44 to 12.95 Watts
0.44 to 3.84 Watts
3.84 to 6.49 Watts
6.49 to 12.95 Watts (or to 15.4Watts)
12.95 to 25.50 Watts (or to 30.8Watts)
In this mode the Maximum Power fields have no effect.
The PoE chip of PD69012 has designed to that Class level 0 will be assigned to 15.4
watts by AF mode and 30.8 watts by AT mode under classification power limit mode. It is
hardware limited.
Figure 4-16-2: PoE Configuration Screenshot
User's Manual of XGSW-28040HP
Classification unimplement
316
Class Dsecription
Very low power
Low power
Mid power
High power
, screen in Figure 4-16-2