Installing The Sfp/Sfp+ Transceiver - Planet XGSW-28040HP User Manual

L2+ 24-port 10/100/1000mbps 802.3at poe + 4-port 10g sfp+ managed switch with hardware layer3 ipv4/ipv6 static routing

Hide thumbs Also See for XGSW-28040HP:

Table of Contents

User's Manual of XGSW-28040HP

Figure 2-2-3: Mounting Managed Switch in a Rack

Proceed with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power to the

Managed Switch.

2.2.3 Installing the SFP/SFP+ Transceiver

The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are

hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power

down the Managed Switch, as the

Figure 2-2-4

Figure 2-2-4: Plug-in the SFP/SFP+ Transceiver