Power Over Ethernet; Power Over Ethernet Powered Device - Planet XGSW-28040HP User Manual

L2+ 24-port 10/100/1000mbps 802.3at poe + 4-port 10g sfp+ managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for XGSW-28040HP:
Table of Contents

Advertisement

4.16 Power over Ethernet

Providing up to 24 PoE, in-line power interfaces, the XGSW-28040HP PoE Switch can easily build a power central-controlled IP
phone system, IP Camera system, AP group for the enterprise. For instance, 24 camera / AP can be easily installed around the
corner in the company for surveillance demands or build a wireless roaming environment in the office. Without the power-socket
limitation, the XGSW-28040HP PoE Switch makes the installation of cameras or WLAN AP more easily and efficiently.

4.16.1 Power over Ethernet Powered Device

3~5 Watts
6~12 Watts
10~12 Watts
Figure 4-16-1: Power over Ethernet Status
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where UPS is installed for
un-interrupt power system and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation.
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC sockets.
314
User's Manual of XGSW-28040HP

Advertisement

Table of Contents
loading

Table of Contents