Table of Contents
Advertisement
4.2.2 IP Configuration
The IP Configuration includes the IP Configuration, IP Interface and IP Routes. The configured column is used to view or
change the IP configuration. The maximum number of interfaces supported is 128 and the maximum number of routes is 32.
The screen in
Figure 4-2-2
The current column is used to show the active IP configuration.
Object
IP Configurations
appears.
Figure 4-2-2: IP Configuration Page Screenshot
Mode
DNS Server
Description
Configure whether the IP stack should act as a Host or a Router. In
Host mode, IP traffic between interfaces will not be routed. In Router
mode traffic is routed between all interfaces.
This setting controls the DNS name resolution done by the switch. The
following modes are supported:
From any DHCP interfaces
The first DNS server offered from a DHCP lease to a DHCP-enabled
interface will be used.
No DNS server
No DNS server will be used.
Configured
Explicitly provide the IP address of the DNS Server in dotted decimal
notation.
From this DHCP interface
44
User's Manual of XGSW-28040HP
Advertisement
Table of Contents
