Auto-Negotiation - Planet XGSW-28040HP User Manual

L2+ 24-port 10/100/1000mbps 802.3at poe + 4-port 10g sfp+ managed switch with hardware layer3 ipv4/ipv6 static routing

Hide thumbs Also See for XGSW-28040HP:

Table of Contents

User's Manual of XGSW-28040HP

re-transmission rate. No packet loss will occur.

5.5 Auto-Negotiation

The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth

when a connection is established with another network device (usually at Power On or Reset). This is done by detect the modes

and speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect

with the port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in Full-duplex mode.