Table of Contents
Advertisement
Destination MAC
Address
IP Address
TCP/UDP Port Number
Static Aggregation Group Configuration
The Aggregation Group Configuration screen in
The Page includes the following fields:
.Object
Group ID
Port Members
disable. By default, Source MAC Address is enabled.
The Destination MAC Address can be used to calculate the destination port for
the frame. Check to enable the use of the Destination MAC Address, or uncheck
to disable. By default, Destination MAC Address is disabled.
The IP address can be used to calculate the destination port for the frame. Check
to enable the use of the IP Address, or uncheck to disable. By default, IP Address
is enabled.
The TCP/UDP port number can be used to calculate the destination port for the
frame. Check to enable the use of the TCP/UDP Port Number, or uncheck to
disable. By default, TCP/UDP Port Number is enabled.
Figure 4-5-3
Figure 4-5-3: Aggregation Group Configuration Page Screenshot
Description
Indicates the group ID for the settings contained in the same row. Group ID
"Normal" indicates there is no aggregation. Only one group ID is valid per port.
Each switch port is listed for each group ID. Select a radio button to include a port
in an aggregation, or clear the radio button to remove the port from the
aggregation. By default, no ports belong to any aggregation group.
User's Manual of XGSW-28040HP
appears.
95
Advertisement
Table of Contents
