Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Planet XGS3-24042
Summary of Contents for Planet XGS3-24042
- Page 1 24-Port Gigabit with 4 Optional 10G Slots Layer 3 Managed Stackable Switch XGS3-24042 Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Content ..................3 2. Switch Management ..................4 3. Requirements ..................... 5 4. Terminal Setup ................... 6 5. Logon on the Console ................. 7 6. Configure IP Address .................. 8 7. Telnet Management ..................10 8. Start Web Management ................11 9. Save the Configuration ................12 10. Login the Managed Switch .................13 11. -
Page 3: Package Content
1. Package Content Thank you for purchasing PLANET Layer 3 IPv6/IPv4 Managed Switch, XGS3-24042. Terms of “Managed Switch” means the Switch mentioned titled in the cover page of this quick installation guide. Open the box of the Managed Switch and carefully unpack it. The box should contain the following items: The XGS3 Managed Switch x 1 This Quick Installation Guide x 1 User’s Manual CD x 1 RJ-45-to-DB9 Console Cable x 1 Power Cord x 1 Rubber Feet x 4... -
Page 4: Switch Management
2. Switch Management To setup the Managed Switch, the user needs to configure the Managed Switch for network management. The XGS3 Managed Switch provides two management options: Out-of-Band management and In-Band management. Out-of-Band Management Out-of-band management is the management through Console interface. Generally, the user will use out-of-band management for the initial switch configuration, or when in-band management is not available. -
Page 5: Requirements
3. Requirements The Managed Switch provide remote login interface for manage; the following equipments are necessary for further management. Workstation running Windows XP/2003/Vista/Windows 7, MAC OS X, Linux, Fedora, Ubuntu or other platform. Serial Port connect (Terminal) Above Workstation with COM Port (DB9) or USB-to-RS-232 converter. Above Workstation has installed with terminal emulator, such as Hyper Terminal included in Windows XP/2003/Windows Vista. -
Page 6: Terminal Setup
4. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the XGS3 Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem. -
Page 7: Logon On The Console
5. Logon on the Console Once the terminal has connected to the device, power on the XGS3 Managed Switch, the terminal will display that it is running testing procedures. Then, the following message asks the login user name and password. The factory default user name and password as following and the login screen in Figure 5-1 appears. -
Page 8: Configure Ip Address
“XGS3-24042” hereafter if not otherwise specified): XGS3-24042> XGS3-24042> enable XGS3-24042# config XGS3-24042 (config)# interface vlan 1 XGS3-24042 (Config-if-Vlan1)# ip address 192.168.1.254 255.255.255.0 The previous command would apply the follow settings for the Managed Switch. IPv4 Address: 192.168.1.254 Subnet Mask: 255.255.255.0 Figure 6-1 Configure IPv4 address screen To check the current IP address or modify a new IP address for the Switch, please... -
Page 9: Show The Current Ip Address
Show the current IP address 1. On "XGS3-24042#” prompt, enter “show ip interface brief”. 2. The screen displays the current IP address, Subnet Mask and Gateway. As show in Figure 6-2. Figure 6-2 Show IP information screen If the IP is successfully configured, the Managed Switch will apply the new IP address setting immediately. You can access the Web interface of XGS3 Managed... -
Page 10: Telnet Management
XGS3-24042> enable XGS3-24042# config XGS3-24042 (config)# username admin privilege 15 password 0 admin Enter valid login name and password in the Telnet configuration interface, Telnet user will be able to enter the Managed Switch’s CLI configuration interface. The commands used in the Telnet CLI interface after login is the same as that in the Console interface. -
Page 11: Start Web Management
To enable the Web configuration, users should type the CLI command IP http server in the global mode as below: XGS3-24042> enable XGS3-24042# config XGS3-24042 (config)# ip http server The Managed Switch provides a built-in browser interface. You can manage it remotely by having a remote host with Web browser, such as Microsoft Internet Explorer, Mozilla Firefox, Google Chrome or Apple Safari. -
Page 12: Save The Configuration
RAM to FLASH by write command or copy running-config startup-config command, so that the running configuration sequence becomes the start up configuration file, which is called configuration save. XGS3-24042> enable XGS3-24042# copy running-config startup-config Figure 9-1 Copy running-config startup-config screen... -
Page 13: Login The Managed Switch
10. Login the Managed Switch 1. Use Internet Explorer 7.0 or above Web browser, enter IP address http://192.168.1.254 (that you have just set in console) to access the Web interface. 2. When the following dialog box appears, please enter the configured user name “admin” and password “admin” (or the username / password you have changed via console). The login screen in Figure 10-1 appears. -
Page 14: Customer Support
11. Customer Support Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve you issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQ : http://www.planet.com.tw/en/support/faq.php?type=1 Switch support team mail address : support_switch@planet.com.tw Copyright © PLANET Technology Corp. 2012. Contents subject to revision without prior notice. - Page 15 This page is intentionally left blank...
- Page 16 This page is intentionally left blank...