Planet XGSW-28040HP User Manual page 17

L2+ 24-port 10/100/1000mbps 802.3at poe + 4-port 10g sfp+ managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for XGSW-28040HP:
Table of Contents

Advertisement

 MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
 BPDU Guard
 Supports Link Aggregation
 802.3ad Link Aggregation Control Protocol (LACP)
 Cisco ether-channel (Static Trunk)
 Maximum 14 trunk groups, up to 8 ports per trunk group
 Up to 16Gbps bandwidth (full duplex mode)
 Provides Port Mirror (many-to-1)
 Port Mirroring to monitor the incoming or outgoing traffic on a particular port
 Loop protection to avoid broadcast loops
Layer 3 IP Routing Features
 Supports maximum 128 static routes and route summarization
Quality of Service
Ingress Shaper and Egress Rate Limit per port bandwidth control
8 priority queues on all switch ports
Traffic classification
-
IEEE 802.1p CoS
-
TOS / DSCP / IP Precedence of IPv4/IPv6 packets
-
IP TCP/UDP port number
-
Typical network application
Strict priority and Weighted Round Robin (WRR) CoS policies
Traffic-policing policies on the switch port
DSCP remarking
Multicast
 Supports IGMP Snooping v1, v2 and v3
 Supports MLD Snooping v1 and v2
 Querier mode support
 IGMP Snooping port filtering
 MLD Snooping port filtering
 MVR (Multicast VLAN Registration)
Security
 IEEE 802.1X Port-based / MAC-based network access authentication
 IEEE 802.1X Authentication with Guest VLAN
 Built-in RADIUS client to cooperate with the RADIUS servers
 RADIUS / TACACS+ users access authentication
 IP-based Access Control List (ACL)
 MAC-based Access Control List (ACL)
User's Manual of XGSW-28040HP
17

Advertisement

Table of Contents
loading

Table of Contents