Table of Contents
Advertisement
Main Menu
Operating the Radio
Turn the ignition switch to ACCES-
SORY (I) or ON (II). Turn the radio
on by pressing the ON/OFF button.
The radio will come on and display
the frequency of the last station it
was tuned to. The power antenna will
also extend. Adjust the volume with
the VOL dial (outside ring of the left
knob). Select the AM or FM band by
pushing the A M / F M button. The
selected band is shown next to the
frequency display.
Finding Radio Stations
To tune to a station, turn the TUNE
dial (outside ring of the right knob).
Turn it clockwise to tune to a higher
frequency, and counterclockwise to
tune to a lower frequency. The
STEREO indicator next to the
frequency display lights if the station
is broadcasting in FM stereo. The
STEREO indicator will flash if you
are driving in an area where the radio
signal is weak. This system cannot
receive AM broadcasts in stereo.
Table of Contents
BAND
DISPLAY
LOW
STEREO
INDICATOR
Comfort and Convenience Features
Audio System
AM/FM
BUTTON
HI
TUNE
DIAL
CONTINUED
Advertisement
Chapters
Table of Contents
