Table of Contents
Advertisement
Main Menu
Lights
Replacing a Rear License Bulb
1. Use a Phillips-head screwdriver to
remove the two outer screws
holding the license plate light
assembly to the bumper bracket.
Pull the assembly away from the
bracket.
Maintenance
Table of Contents
2. Remove the socket from the light
assembly by turning it one-half
turn to the right.
3. Pull the bulb out of the socket.
4. Install the new bulb.
5. Turn on the parking lights and
make sure the new bulb is work-
ing. Reinstall the license plate
assembly on the bumper bracket
with the same two screws.
Advertisement
Chapters
Table of Contents
