Table of Contents
Advertisement
Main Menu
Service Station Procedures
SUPPORT ROD
3. Pull the support rod out of its clip
and insert the end into the square
hole on the right side of the hood.
4. To close the hood, lift it up slightly
to remove the support rod from
the hole.
Before Driving
Table of Contents
CLIP
5. Snap the support rod back into its
holding clip.
6. Lower the hood about halfway
down and let the hood drop. Make
sure the hood is securely latched.
Refer to Maintenance on pages 133-
183
for instructions on h o w to check
items under the hood.
Advertisement
Chapters
Table of Contents
