Main Menu
Cooling System
BLEEDER CAP
10. Remove the bleeder cap from the
top of the heater inlet.
Maintenance
Table of Contents
BLEEDER
BOLT
11. Loosen the bleeder bolt on top of
the engine.
12. Loosen the bleeder bolt near the
expansion tank.
13. Pour coolant into the expansion
tank. Coolant will go through the
tank into the system. When the
tank is full, go to each of the four
bleeders. Close each bleeder
when coolant comes out of it in a
steady stream with no bubbles.
You may need to refill the
expansion tank.
BLEEDER
BOLT