Parking Brake - Acura 1995 NSX Online Reference Owner's Manual

Main Menu
MIN.
RESET
HOUR
To set the clock:
1. Turn the ignition switch ON (II) to
display the time.
2. Raise the lid to the left of the clock
display. You will see HOUR, MIN.,
and RESET buttons.
3. Press and hold the HOUR button
until the hour advances to the
desired time.
Table of Contents
4. Press and hold the MIN. button
until the numbers advance to the
desired time.
You can use the RESET button to
quickly set the time to the nearest
hour. If the displayed time is before
the half hour, pressing RESET sets
the clock back to the previous hour.
If the displayed time is after the half
hour, pressing RESET sets the clock
forward to the beginning of the next
hour.
For example:
1:06 would RESET backward to
1:00.
1:52 would RESET forward to 2:00.
Digital Clock, Parking Brake

Parking Brake

To apply the parking brake, p u l l the
lever up fully. To release it, p u l l up
slightly, push the button, and lower
the lever. The parking brake light on
the instrument panel should go out
when the parking brake is f u l l y
released (see page 31). If y o u try to
drive the car without releasing the
parking brake, the ABS cannot work
properly.
Instruments and Controls