Acura 1995 NSX Online Reference Owner's Manual page 178

Main Menu
Replacing a Front Turn Signal
and Parking Light Bulbs
1. Use a Phillips-head screwdriver to
remove the turn signal assembly's
mounting screw.
2. Remove the turn signal assembly
from the bumper. Remove the
electrical connector from the bulb
holder by squeezing the connector
and pulling.
Table of Contents
3. Remove the bulb holder from the
turn signal assembly by turning it
one-quarter turn to the left.
4. To remove the turn signal bulb,
push it in slightly and turn it
counterclockwise. To remove the
parking light bulb, pull it straight
out of its holder.
5. Install the new bulb in the socket.
6. Push the bulb holder into the turn
signal assembly and turn it clock-
wise until it locks.
7. Reconnect the electrical connector
to the bulb holder.
8. Test the turn signals to make sure
the new bulb is working.
9. Put the turn signal assembly into
the bumper. Install and tighten the
mounting screw.
Maintenance
Lights