Headlights - Acura 1995 NSX Online Reference Owner's Manual

Main Menu
Steering Column Controls

Headlights

The rotating switch on the left pod
controls the lights. Turning this
switch to the first position
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the second
position raises the headlights
and turns them on.
Instruments and Controls
Table of Contents
If you leave the lights on with the
ignition switch in ACCESSORY (I) or
LOCK (0), you will hear a reminder
chime when you open the driver's
door.
turns
To change between low beams and
high beams, pull back on the turn
signal lever as far as it will move
towards you, then let go. The blue
high beam indicator will light (see
page 34).
To flash the high beams when the
headlight doors are closed, pull back
and hold the turn signal lever. This
simultaneously raises the headlight
doors and turns on t h e high beams.
Release the lever and the high beams
go off. Within a few seconds, the
headlight doors will close automati-
cally.
The high beams will stay on for as
long as you hold the lever, no matter
what position the headlight switch is
in.
Daytime Running Lights
(Canadian Models)
Your car has Daytime Running
Lights (DRL) in addition to the
headlights. With the ignition ON (II)
and the light switch O F F or at
DRL turns on when y o u release the
parking brake. DRL turns off when
you turn the ignition off or the
headlights on.