Acura 1995 NSX Online Reference Owner's Manual page 48

Main Menu
Steering Wheel Controls
Even with the cruise control turned
on, you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The car will
return to the set cruising speed.
Resting your foot on the brake or
clutch pedal will cause the cruise
control to cancel.
Cancelling the Cruise Control
Any of these actions take the car out
of cruise control:
Tap the brake or clutch pedal.
Press the SET/decel and
RESUME/accel buttons at the
same time.
Press the Cruise Control Master
Switch.
When you tap the brake or clutch
pedal, or press the SET and
RESUME buttons at the same time,
the CRUISE CONTROL light on the
instrument panel will go out and the
car will begin to slow down. You can
Instruments and Controls
Table of Contents
use the accelerator pedal in the
normal way.
If you use the brake or clutch pedal
to cancel cruise control, the system
retains the previously-set cruising
speed. To return to that speed,
accelerate to above 25 mph (40 k m /
h) and press the RESUME/accel
button until the CRUISE CONTROL
light comes on. The car will acceler-
ate to the same cruising speed as
before.
If you cancel cruise control by press-
ing the SET and RESUME buttons at
the same time, the previously-set
cruising speed is erased. To use the
cruise control, accelerate to the
desired cruising speed and press the
SET/decel button.
Pressing the Cruise Control Master
Switch turns the system completely
off and erases the previous cruising
speed from memory. To use the
system again, refer to Using the
Cruise Control.