Datamax M-Class Mark II Maintenance Manual page 74

4. Slide the Bottom Carriage backward until the Catches are free and then separate the
Bottom Carriage from the Top Carriage.
Top
Carriage
5. Remove the Cams and Springs from the Top and Bottom Carriages.
Cams
Springs
Installation:
1. Place the Springs into the Sockets in the Top Carriage and then place the Cams, with
the Indicators oriented for least pressure (see drawing), onto the Springs.
Cams
Springs
Removal and Replacement
Catches
Indicators
Sockets
4-10
Bottom
Carriage
Bottom
Carriage
Top
Carriage
Bottom
Carriage
Top
Carriage