Monitoring Audio During Recording - JVC GY-DV500U Instructions Manual

6-9 Monitoring Audio during Recording

The audio input during recording, in record-pause or stop mode
can be monitored through the monitoring loudspeaker or
earphone.
• The monitoring audio is not output from the loudspeaker while
the EARPHONE jack is in use.
• Select the audio channel to be monitored using the MONITOR
SELECT switch.
CH-1 : The sound input to the CH-1 channel is output.
MIX : The sound input to the CH1 and CH2 channels is
output mixed.
CH-2 : The sound input to the CH-2 channel is output.
• The MONITOR volume control adjusts the monitoring
volume.
• The loudspeaker or earphone outputs an alarm tone in the
case of an abnormal condition occurring in the unit.
An alarm tone is also output when the tape end is reached
or when the battery is running down. The alarm tone volume
can be adjusted with the ALARM control. For details on the
alarm tone, see page 87.
* Do not increase the audio monitoring volume excessively;
otherwise howling with the camera microphone may
occur.
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
FILTER
1 3200k ALARM
2 5600k
3 5600k+ND
SHUTTER STATUS MONITOR
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
BACK L STRETCH
NORMAL NORMAL
SPOT L COMPRESS
POWER
NG
ON OFF
ALARM
MONITOR
control control
OPERATE/WARNING
LIGHT
RESET ON
OFF
MONITOR
COUNTER
SELECT
CTL
TC
UB
CH-1 AUDIO CH-2
LEVEL
MONITOR SELECT
switch
Monitoring
loudspeaker
EARPHONE
jack
49