Advanced Process Screen; Skin Color Adjust Screen - JVC GY-DV500U Instructions Manual

12-7 ADVANCED PROCESS Screen

Item
COLOR Sets the color matrix
MATRIX OFF ...... Deactivates the color matrix function
ON ....... The color reproducibility is enhanced, but noise increases.
CAUTION:
During the LOLUX operation, COLOR MATRIX is fixed to the OFF
setting and "FIX" is displayed.
GAMMA Correction of the gamma curve to decide the reproducibility of black color.
• To enhance the black color reproducibility. However, halftones will be
lost for white section
............... Increase the number
• When reproducibility of the black color is not so important
............... Decrease the number
CAUTION:
• During LOLUX operation, "FIX" is displayed because GAMMA is fixed
at the MIN value.
SKIN COLOR Pressing the SHUTTER dial once when the cursor is at this position
ADJUST switches the screen to display the SKIN COLOR ADJUST screen.
PAGE BACK The PROCESS MENU returns when the SHUTTER dial is pressed with
the cursor at this position.

12-8 SKIN COLOR ADJUST Screen

Item
SKIN COLOR Sets whether it is possible to change the color used by the Skin Detail
DETECT function.
EXECUTE ...... Choose this setting to allow detection of the color used by
STOP ............. Choose this setting to stop detection of the color used by
See "Using the Skin Detail Function" on page 84.
SKIN COLOR The setting of this item can only be changed when the SKIN COLOR
RANGE DETECT item is set to EXECUTE.
This setting is for adjusting the skin color range where Skin Detail functions.
(When this item is selected, the area where the Skin Detail function is
applicable is indicated by zebra patterns on the screen.)
While viewing the zebra pattern range, perform the adjustment.
Increasing the range ........ Increase the number
Increasing the range . ...... Decrease the number
PAGE BACK The ADVANCED PROCESS MENU returns when the SHUTTER dial is
pressed with the cursor at this position.
Function, Operation
Function, Operation
the Skin Detail function.
the Skin Detail function.
12. SETUP MENU
Variation Range Initial Setting
ON ON
OFF
MAX (8) NORMAL
7
17
gradations
to
NORMAL (0)
to
-7
MIN (-8)
– –
Variation Range Initial Setting
STOP STOP
EXECUTE
WIDE NORMAL
+19
(33 gradations)
to
NORMAL
to
-11
NARROW
– –
75