Vf Display Screen - JVC GY-DV500U Instructions Manual

12. SETUP MENU

12-4 VF Display Screen

Item
F NO. Selects whether or not the F-number of the lens iris is displayed on the
DISPLAY Status 1 screen.
ON ........................ F-number is displayed.
OFF ....................... F-number is not displayed.
AUDIO Selects whether or not the audio indicator is displayed on the Status 1
DISPLAY screen.
ON ........................ Audio indicator is displayed.
OFF ....................... Audio indicator is not displayed.
SAFETY ZONE Selects the safety zone setting.
See "Safety Zone" on page 29.
REC TIME Sets whether the remaining tape recording time or TIME CODE is displayed
on the Status 1 screen.
TIME CODE .......... TIME CODE is displayed.
REMAIN ................ Remaining time is displayed.
ZEBRA Switches the luminance level of the subject sections where the zebra
pattern is displayed.
70-80% ................. Zebra pattern is displayed in sections with luminance
85-95% ................. Zebra pattern is displayed in sections with luminance
OVER 95% ............ Zebra pattern is displayed in sections with luminance
OVER 100% .......... Zebra pattern is displayed in sections with luminance
PAGE BACK The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
72
Function, Operation
* The time code is displayed even if the VCR Setup
Menu item No. 516 DISPLAY SELECT is set to
"CLOCK".
levels between 70% and 80%.
levels between 85% and 90%.
levels over 95%.
levels over 100%.
Variation Range Initial Setting
ON ON
OFF
ON ON
OFF
OFF OFF
ZONE 1
ZONE 2
ZONE 3
TIME CODE REMAIN
REMAIN
70-80% 70-80%
85-95%
OVER95%
OVER100%
– –