Inserting And Replacing Backup Lithium Batteries - JVC GY-DV500U Instructions Manual

3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS

3-7 Inserting and Replacing Backup Lithium Batteries

The GY-DV500 uses a lithium battery for backup of the time code data and time date data. Install the provided lithium battery before
actually using the unit.
Lithium battery: CR2032
FILTER
1 3200k
ALARM
2 5600k
3 5600k+ND
SHUTTER STATUS
MONITOR
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
BACK L STRETCH
NORMAL NORMAL
SPOT L COMPRESS
POWER
NG
ON OFF
Power switch
When the lithium battery is not in place or the battery is exhausted and requires a replacement, the "Li" indicator in the LCD display
will light up.
Replace lithium batteries with the POWER switch set to ON. Doing it with the POWER switch set to OFF will cause the loss of
backup data.
How to Install the Lithium Battery
Lithium battery cover
LITHIUM BATT.
1.
Push the lithium battery cover in the direction of the arrow
as illustrated and remove the cover.
2.
Slide the battery into place with its
upward.
3.
Return the lithium battery cover to its original position in the
unit.
34
"Li" indicator
OPERATE/WARNING
LIGHT
CH 1
OVER AUTO OFF DEW
RESET ON
40 30 20 10 0 dB
SERVO RF L i OFF
CH 2 OVER
32k 48k PB NDF HOLD
AUD LOCK SP
MONITOR
SELECT COUNTER
MENU
H M S F
CTL
REMAIN E BATT F
REV FWD
TC
UB
H M
CH-1 AUDIO CH-2
LEVEL
marked surface facing
CAUTION:
If the unit is not used for a lengthy period of time (one
month or more), remove the lithium battery. If the voltage
of the lithium battery becomes low, the set may malfunction.
CH-1 AUDIO CH-2
LEVEL CH-1 CH-2
AUTO
MANUAL
AUDIO SELECT
AUDIO INPUT
CH-1 CH-2
FRONT
REAR
LITHIUM BATT.
GROUP
HOLD
Lithium battery case
How to Remove Lithium Batteries
TC GENERATOR
PRESET FREE
REGEN REC
CONTINUE MENU
ITEM SELECT DATA SET
SHIFT ADVANCE PRESET
The lithium battery is easily removed
if you press at the edge of the
lithium batter y at the place
indicated in the illustration on the
left and then pull the battery out.