Operation - Dimplex MULTIFIRE DF3215 Parts & Service Manual

DF3215

OPERATION

ELECTRIC FIREPLACE MANUAL CONTROL
The manual controls for the fireplace are located in the upper right hand corner.
A. Main On/Off Switch
Supplies power to the 3 position manual control switch.
B. 3 Position Manual Control Switch
Position 1 (left position): The unit is operated with the remote control.
Position 2 (center position): The flame effect is turned ON.
Position 3 (right position): The flame effect and heater are turned ON simultaneously.
When the manual control is in Position 3 the heater does not run on the remote
operated thermostat. When the heater is ON the red indicator light is activated on the
firebox and the fan and heater are running on low.
NOTE
When the manual control is in positions 2 and 3, the fireplace unit will not operate with
the remote control.
RESETTING THE TEMPERATURE CUTOFF SWITCH
Should the heater overheat, an automatic switch will turn the heater off and it will not
come back on without being reset. The temperature cutoff switch can be reset by
unplugging the unit, waiting 5 minutes and plugging the unit back in.
CAUTION
If you need to continuously reset the heater, unplug the unit and call Dimplex North
America Limited at 1-800-668-6663 and press 4 for technical support.
SERIAL No.
XXX XX
1
Initialization
Button
Indicator
3 Position
Light
Manual
Control
FIGURE 1
Main
On/Off
Switch