DF3215
FREQUENCY INTERFERENCE
If the fireplace does not respond properly to the remote control, the remote operating
frequency may have to be reset. The remote control can send another frequency code
to the circuit board to eliminate interference.
1. Press the ENTER button on the remote control, the middle display
2. Use the direction buttons on the hand held remote to move the cursor to
press ENTER.
3. Press and hold the initialization button on the unit.
4. Press and hold
5. A descending bar graph will appear on the screen.
6. The green indicator light will flash on the unit when the new frequency code has
been stored.
7. Release
left direction button on the remote control.
8. Release the initialization button on the unit.
9. Press ENTER to return to the main menu.
left direction button on the remote control.
SERIAL No.
XXX
XX
3
Initialization
Button
3 Position
Indicator
Manual
Light
Control
flashes.
and
Main
On/Off
Switch
FIGURE 4