Table of Contents
Advertisement
Operation
The fireplace can be operated with the multi–function IR remote control or from the
control panel located on the right-hand side of the unit. The remote control has an
operating range of up to 4m / 13ft.
1. Power ON / OFF
2. Flame Control
3. Heat Control
4. Backlight Control
5. Timer Control
6. Digital Display
!
The heater on your fireplace may emit a slight, harmless odor when first
NOTE:
used. This odor is a normal condition caused by initial heating of internal heater
parts and will not occur again.
CUTOFF SWITCH
!
There is a safety temperature cutoff switch (cutout) inside the heater. If the
NOTE:
heater overheats, the cutout will shut off the supply power.
It can be reset by unplugging the unit and waiting 5 minutes before plugging the
unit back on.
If you need to continuously reset the heater, unplug the unit and call
CAUTION:
technical service at 1-888-346-7539.
14
4
4
3
3
1
1
2
2
5
5
6
5
4
3
2
1
Advertisement
Table of Contents
