Step 4: Fuelbed Assembly; Operation And Use - Dimplex Vivente VVT775 Operating Instructions Manual

3.Build the finished wall up against the appliance using the glass trims as a guide. The finished
wall should be built in a way that allows the power supply to be accessible after installation.
It is recommended to leave 150mm of clearance area directly above the product for ventilation
purposes. (Fig. 12) This clearance area can be located behind the finished wall surface.
The product should not be sealed in place with silicone or adhesive as this can restrict airflow.

Step 4: Fuelbed Assembly

A range of fuel bed material has been provided for you to choose your desired look.
A set of high-quality ceramic logs enhance the effect of this fire. Please take great care when handling
these logs to ensure they do not get dropped or rub against each other, as they are easily marked.
The following fuel bed media is included
• Ceramic Logs
• Ash Dust
• Crystal pieces
We have taken great care to create what we feel is the most authentic fuel bed, please follow the
steps below for more information. Please note: A mix and match of fuelbed media can also be
done to create unique fuel bed assembly.
1. Remove front trim on unit. (Fig. 2)
2. Remove Front Glass from product and store in a safe place. (A suction cup is provided to help
remove/place the front glass.) (Fig. 6)
3. For a contemporary setup (Fig.14), place crystals on fuel bed, covering the top surface of the fuel
bed. These will provide a glowing embers effect, when the flame effect is operating.
4. For a traditional look, arrange the logs on top of the fuel bed, to your preference. Please follow
the steps at the end of this document which provide a visual representation for log arrangement.
Ash dust is also supplied for this setup. Sprinkle this across the fuel bed to produce a realistic
log burning effect.
5. Reverse steps 1 and 2 to re-assemble product.

Operation and Use

WARNING: Failure to follow these operating instructions may result in injury and/or damage.
Thank you for choosing the Vivente. We hope you enjoy using your new electric fire. Please take
a few minutes to read these instructions. This will help you understand and benefit from all of the
following features:
• Onboard controls
• Remote control
• App control
• Heating – including "Comfort$aver"
• Flame effects
• SmartSense
All manuals and user guides at all-guides.com
6