Remote Control Receiver Replacement - Dimplex MULTIFIRE DF3215 Parts & Service Manual

DF3215
If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE REMOTE CONTROL RECEIVER
1. Remove firebox from mantel.
2. Remove (8) screws from top panel.
3. Remove wiring connections from remote control receiver noting their original
locations.
4. From under the top panel, break off the seven mounting studs on the remote control
receiver by grasping with pliers and twisting on the protruding part of the stud, push
the remainder of the studs out through the top panel.
NOTE: New mounting studs are supplied with the replacement remote control
receiver.
5. Properly orientate the new remote control receiver and connect all of the wiring
connections.
6. Reassemble in the reverse order as above.
12