Remote Control Switch Board Replacement - Dimplex MULTIFIRE DF3215 Parts & Service Manual

DF3215
If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE REMOTE CONTROL SWITCH BOARD
1. Remove firebox from mantel.
2. Remove (8) screws from top panel.
3. Disconnect the 10" wire harness from the remote control switch board.
4. From under the trim assembly, break off the two mounting studs on the remote
control switch board by grasping with pliers and twisting on the protruding part of the
stud, push the remainder of the studs out through the trim assembly.
NOTE: New mounting studs are supplied with the replacement remote control switch
board.
5. Remove remote control switch board.
6. Reassemble in the reverse order as above.
11