Heater Assembly Replacement - Dimplex MULTIFIRE DF3215 Parts & Service Manual

DF3215
If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE HEATER ASSEMBLY
1. Remove firebox from mantel.
2. Remove (8) screws from top panel.
3. Remove wiring connections from heater assembly noting their original locations.
4. Remove cutout wire from JP15 location on the remote control receiver board.
5. Remove (4) heater assembly mounting screws from top panel.
6. Remove (2) heater assembly mounting brackets from heater assembly.
7. Reassemble in the reverse order as above.
16