Enabling The Callpilot Modem; Enabling Modem Access Using Callpilot Manager; Enabling Modem Access Using A Telephone - Nortel CallPilot 150 Installation And Maintenance Manual

Enabling the CallPilot modem

You must enable the CallPilot modem before you access the system using the modem.

Enabling Modem access using CallPilot Manager

1
Log on to CallPilot Manager.
2 Click the Configuration heading.
3 Click the Access Passwords link.
4 Enter a password in the Modem Access box.
5 Enter the password again in the Confirmation box.
6 Click the Submit button.
Note: To disable Modem access, clear the Modem Access and Confirmation boxes and
then click the Submit button.

Enabling Modem access using a telephone

Follow this procedure to enable the Modem access password using a telephone.
Log:
QUIT RETRY OK
Admin
MBOX AA
Voice Mail:Y
CHNG
Dir avail:Y
CHNG
Match:Lastname
CHNG
Modem access:N
CHNG
Pswd:
RETRY
Again:
RETRY
1. Press
2. Enter the system administration mailbox number and
password.
3. Press › .
OTHR
4. Press NEXT .
NEXT
5. Press NEXT .
NEXT
6. Press OK .
OK
7. Press CHNG .
OK
8. Enter the new Modem access password and press OK .
Note: If you do not enter a password, Modem access is
OK
disabled.
9. Re-enter the new Modem access password and press OK .
OK
10. Press ® .
.
≤·°‹
CallPilot 100/150 Installation and Maintenance Guide
Modem Access 73