Creating A Dial-Up Networking Connection On Windows 2000 Or Windows Xp; Windows Xp - Nortel CallPilot 150 Installation And Maintenance Manual

Creating a Dial-Up Networking connection on Windows 2000 or Windows XP

1 Click the Start button and then click Programs.
2 Click Accessories and then click Communications.
3 Click Network and Dial-Up Connections.
The Network and Dial-Up Connections dialog box appears.
4
Double click the Make new Connection icon.
The Network Connection Wizard appears.
5
Click the Next button.
6
Select the Dial-up to private network option.
7
Click the Next button.
8 In the Phone number box, enter a telephone number.
It does not matter what telephone number you enter in this box because the number is not used
for the connection to the CallPilot system.
9 Click the Next button.
10 Ensure the For All users option is selected.
11 Click the Next button.
12 Enter a name for this connection.
13 Click the Finish button.
Configuring the Dial-Up Networking TCP/IP parameters on Windows 2000 or

Windows XP

1 The new connection you just created should now be displayed. If it is not displayed, right click
on the Dial-Up Networking connection you created for CallPilot and then click Properties.
2
Click the Configure button.
3
Clear the following options:
Enable hardware flow control
Enable modem error control
Enable modem compression
Show Terminal window
4 Make sure the Enable modem speaker option is selected so that you can hear the modem
negotiation.
5 Click the OK button.
6 Click the Security tab.
7 Select the Advanced (custom settings) option.
8
Click the Settings button.
9
Ensure that Data encryption is set to Optional encryption (connect even if no encryption).
10 Select the Allow these protocols option.
CallPilot 100/150 Installation and Maintenance Guide
Modem Access 71