About The Buttons On Your Telephone; Related Publications; Table 1 Telephone Buttons - Nortel CallPilot 150 Installation And Maintenance Manual

12 Preface

About the buttons on your telephone

This guide shows the Business Series Terminal buttons. Table 1 shows which buttons to use on the
different types of Nortel Networks telephones.

Table 1 Telephone buttons

Button Name
Feature
Hold
Volume Control
Release
You can enter ≤ , ƒ or ƒ and the code to use a feature. For example: Press
≤·°⁄ to access your mailbox.
The T7100 works differently from other telephones on your system because it does not have line
buttons. Where other telephones can require that you select a line button to answer a call, with the
T7100 terminal you pick up the handset. Where other telephones require you to select a line button
to take a call off hold, you press ≥ on the T7100 terminal.
On T7100 terminals, you can answer a second call by pressing ˙ . Your active call is put on
hold and you connect to the waiting call. You can have no more than two active calls at one time.
The T7100 terminal does not have a © button.

Related publications

For more information about programming CallPilot 100/150, refer to the following publications:
• CallPilot Manager Set Up and Operation Guide
Provides instructions for setting up the CallPilot 100/150 using CallPilot Manager.
• CallPilot 100/150 Telephone Administration Guide
Provides instructions for setting up the CallPilot 100/150 using a Norstar telephone.
• CallPilot Programming Record
Provides a record of the settings used for the CallPilot 100/150.
• Nortel Networks Call Center Set Up and Operation Guide
Provides instructions for setting up the Call Center features on CallPilot 100/150.
• Nortel Networks Call Center Reporting Set Up and Operation Guide
Provides instructions for setting up the Call Center Reporting feature on CallPilot 100/150.
P0604218 02
T7100, T7208,
T7316, T7316E
≤
≥˙
≥
√
®
M7100, M7208,
M7310, M7324
ƒ
˙
≥
√
®
M7100N, M7208N,
M7310N, M7324N
ƒ
˙
√
®