Initializing The Callpilot 100/150; About Callpilot Manager - Nortel CallPilot 150 Installation And Maintenance Manual

Chapter 5

Initializing the CallPilot 100/150

After you install and power up the CallPilot 100/150, you need to initialize it. Initializing the
CallPilot 100/150 sets the system parameters to their default settings and sets some global
parameters. When the initialization is completed, the CallPilot 100/150 is operational and ready
for you to begin administration programming. Refer to
of documents that provide information about administration programming.
You initialize CallPilot 100/150 using CallPilot Manager or a telephone.
Note: Upgrading to CallPilot 100/150 from a previous voice messaging system.
If you are upgrading from a previous voice messaging system (for example, FlashTalk) to
CallPilot 100/150, you must remove the existing Feature Codes for the old voice
messaging system before you configure CallPilot 100/150. For information about how to
remove the existing Feature Codes, refer to

About CallPilot Manager

CallPilot Manager is an application that you access from a web browser, such as Netscape
Communicator
Manager whenever possible. CallPilot Manager provides access to administration programming
not available from a telephone.
Note: The online Help for CallPilot Manager is best viewed in Internet Explorer.
There can be some page format inconsistencies if you use other browsers.
To use CallPilot Manager, you must have a network connection to the CallPilot 100/150 or an
Ethernet crossover cable. If you are using CallPilot Manager to initialize CallPilot 100/150, refer
to "Initializing CallPilot 100/150 using CallPilot Manager" on page
If you do not have a network connection or an Ethernet crossover cable, you can initialize the
CallPilot 100/150 using a two-line display telephone. If you are using a telephone to initialize
CallPilot 100/150, refer to
1 Netscape is a registered trademark and Communicator is a trademark of Netscape Communications
Corporation.
2 Microsoft and Windows are registered trademarks and Internet Explorer is a trademark of Microsoft
Corporation.
or Microsoft Internet Explorer
1 ®
"Initializing CallPilot 100/150 using a telephone" on page
"Related publications" on page 12
"To remove Feature Codes" on page
. Nortel Networks recommends you use CallPilot
2
CallPilot 100/150 Installation and Maintenance Guide
for a list
64.
®
30.
38.
29