Pioneer PDP-425CMX Technical Manual page 178

RS-232C Adjustment
Command
INPS03 Switches the main screen to INPUT3.
INPS04 Switches the main screen to INPUT4.
INPS05 Switches the main screen to INPUT5.
INP Displays the present main screen input function.
LESS00 Front indicator OFF.
LESS01 Front indicator ON.
MCDS01 Sets the color difference selection to RGB (Video).
MCDS02 Sets the color difference selection to COMPONENT1 (Y CbCr).
MCDS03 Sets the color difference selection to COMPONENT2 (Y PbPr).
MCD Displays the present color difference selection.
MCN Turns mask control to OFF.
MCY Turns mask control to ON.
MGDS0n Performs n x n division of the video wall divider number.
(n = 1 to 5)
MGFS00 Turns the video wall to OFF.
MGFS01 Turns the video wall to ON.
MGF Displays the present state of the video wall.
MGMS00 Joints not considered during video wall display (split).
MGMS01 Joints considered during video wall display (blank).
MGPS** Sets video wall (expansion location/joint considered or not
considered) (refer to the sheet MGP).
MGP Displays the present video wall setting (expansion location/
joint considered or not considered).
MGSSxy Sets the video wall display position.
(x = horizontal position = 1 to 5, y = vertical position = 1 to 5)
MIRS00 Sets mirror mode to OFF (normal display).
MIRS01 Left-right reversal by mirror mode.
MIRS02 Top-bottom reversal by mirror mode.
MIRS03 Left-right top-bottom reversal by mirror mode.
MIR Displays present mirror-mode setting.
MSCS00 Turns off multi-screens.
MSCS01 Turns on multi-screens.
MSC Displays on/off of multi-screens.
MSSS0n Designates PinP sub-screen size (n = 1 to 4).
MSTS01 Sets multi-screen to 2-screen (Side by side 1).
MSTS02 Sets multi-screen to PinP (lower right).
MSTS03 Sets multi-screen to PinP (upper right).
MSTS04 Sets multi-screen to PinP (upper left).
MSTS05 Sets multi-screen to PinP (lower left).
MSTS06 Sets multi-screen to PoutP (Side by side 2-L).
MSTS08 Multi-screen SWAP (Main sub-screen exchange)
MSTS09 Sets multi-screen to PoutP (Side by side 2-R).
MSTS10 Sets multi-screen to 2-SCREEN (Side by side 3).
MSTS11 Sets multi-screen to PoutP (Side by side 4-L).
MSTS12 Sets multi-screen to PoutP (Side by side 4-R).
MST Displays present multi-screen type.
OMH*** Quantity of horizontal movement during MANUAL orbiter mode.
OMI*** Movement interval time during MANUAL orbiter mode.
OMV*** Quantity of vertical movement during MANUAL orbiter mode.
ORBS00 Turns off the orbiter.
ORBS01 Turns on the orbiter (AUTO1).
ORBS02 Turns on the orbiter (AUTO2).
ORBS03 Turns on the orbiter (AUTO3).
ORBS04 Turns on the orbiter (MANUAL).
OSAS01 Sets the OSD display angle to horizontal.
OSAS02 Sets the OSD display angle to vertical.
OSDS00 Sets the OSD display to OFF.
178
Function Command
OSDS01 Sets the OSD display to ON.
OSSS01 Performs expanded display of the OSD size.
OSSS02 Performs contracted display of the OSD size.
PDES00 Power on delay power ON delay mode selection (for more
than 16 screen system use: power on delay OFF).
PDES01 Power on delay power ON delay mode selection (for more
than 16 screen system use: power on delay mode 1).
PDES02 Power on delay power ON delay mode selection (for more
than 16 screen system use: power on delay mode 2).
PDS*** Sets the power on delay time of power ON delay (for 1 to 16
screen system).
PFLS00 Turns off central brightness compensation.
PLY Turns on central brightness compensation.
PMTS00 Turns off image mute.
PMTS01 Turns on image mute.
POF Power OFF
PON Power ON
PUCS00 Turns off pure cinema.
PUCS01 Sets pure cinema to standard.
PUC Displays present pure cinema setting.
QCI Obtains time information.
QPI Obtains integrator/PICTURE information.
QPS Obtains integrator/SCREEN information.
QS0 Obtains menu and integrator OPTION information.
QSS Obtains SETUP information.
QST Obtains status.
QSU Obtains voice status.
QWB Obtains integrator WHITE BAL information.
RHI*** Adjusts R.HIGH.
RLW*** Adjusts R.LOW.
RSL*** Adjusts side mask RED.
SFTS10 Sets signal format to AUTO.
SFTS11 Sets signal format to Type 1.
SFTS12 Sets signal format to Type 2.
SFTS13 Sets signal format to Type 3.
SFTS14 Sets signal format to Type 4.
SFTS15 Sets signal format to Type 5.
SFTS16 Sets signal format to Type 6.
SFTS17 Sets signal format to Type 7.
SFTS18 Sets signal format to Type 8.
SFT Displays the present signal format.
SHP*** Adjusts sharpness.
SNRS00 Turns off DC shift type NR.
SNRS01 Sets DC shift type NR to low.
SNRS02 Sets DC shift type NR to middle.
SNRS03 Sets DC shift type NR to high.
SNR Displays the present DC shift type NR set value.
SOFS00 Sets soft focus to OFF.
SOFS01 Sets soft focus to 1.
SOFS02 Sets soft focus to 2.
SOFS03 Sets soft focus to 3.
SOFS04 Sets soft focus to 4.
SSIS01 Switches sub screen to input 1.
SSIS02 Switches sub-screen to input 2.
SSIS03 Switches sub-screen to input 3.
SSIS04 Switches sub-screen to input 4.
SSIS05 Switches sub-screen to input 5.
Function