Pioneer PDP-425CMX Technical Manual page 150

Integrator Mode
7 Setting the ABL LINK
When it is set to ON, the brightness of the screens on the multiple displays that form the video wall are the same.
Operate it after setting AUTO ID. Operate it after the screen divider has been set at a setting other than OFF.
0 Place the cursor on 'ABL LINK' and press the [2/3]
buttons to change the settings.
Each time the [2/3] buttons are pressed, the setting
changes as shown below.
3
[Setting the ABL LINK]
ON ........... This is set so the brightness of each screen
on the video wall is the same. It can be set
only during 4-screen and 9-screen display.
OFF ......... The brightness of the screens depends on the
setting of each display.
[Connecting four displays]
When it is 'ON', connect the four displays according to
the POSITION sequence numbers in the figure on the
right with the remote control cable (a stereo miniplug sold
in electrical stores). If the screen division or POSITION
has changed, the ABL link turns off.
Note
Make the connections in the same way for a 9 screen video wall.
7 Setting the REPEAT TIMER
If it is set to 'ON', it is possible to set the REPEAT TIMER to the second pair.
Operate it after setting' AUDO ID'. Operate it after the screen divider has been set at a setting other than 'OFF'.
- Set the cursor on 'REPEAT TIMER' and press the [SET]
button.
= Change the settings of the items by pushing the 5/∞/2/3
buttons.
[Setting the REPEAT TIMER]
DIVIDER ......... Setting the 1, 4, and 9 screen displays.
SOURCE ........ Setting the input displayed.
WORK TIME .. It can be set in 1 minute units up to 4
hours and 15 minutes.
When the REPEAT TIMER has been for 2 pairs, it
alternately repeats REPEAT TIMER1 = REPEAT TIMER2
= REPEAT TIMER1. In the case of a video wall, only No.1
is set to control all the settings.
Note
It is effective after the on-screen menu has disappeared.
The 'VIDEO WALL' settings are common for all inputs.
150
3 ON 2
OFF 2
Screen 0
V I D E O WA L L
D I V I D E R
P O S I T I ON
T Y P E
A U T O I D
P . O N D E L AY
A B L L I N K
R E P E A T T I M E R
R E T U R N
SET
COMBINATION
OUT
No.1 No.2
COMBINATION
IN No.4 No.3
COMBINATION
Display 1
COMBINATION
No.1 No.2
COMBINATION
OUT
No.4 No.3
COMBINATION
IN
Display 3
Screen -
R E P E A T
1 D I V I D E R
S OURC E
WORK T I M E
2 D I V I D E R
S OURC E
WORK T I M E
SET
SET
:
O F F
:
N O R M A L
:
O F F
:
O F F
EXIT
MENU
No.1 No.2
COMBINATION
No.4 No.3
OUT
IN
Display 2
OUT
No.1 No.2
COMBINATION
No.4 No.3
IN
Display 4
T I M E R
:
4
:
I N P UT 1
:
0 0 H 0 1 M
:
4
:
I N P UT 2
:
0 0 H 0 1 M
EXIT
MENU