Remote Control Unit - Pioneer PDP-425CMX Technical Manual

Remote Control Unit

2.5 Remote Control Unit
1
2
3
4
5
6
7
8
9
16
1
SCREEN SIZE button
Press to select the screen size.
2
INPUT buttons
0
Press to select the input.
-
3
MENU button
Press to open and close the on-screen menu.
=
4
ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various
settings on the unit.
5
SET button
~
Press to adjust or enter various settings on the unit.
!
6
SUB INPUT button
During multi-screen display, use this button to
change inputs to subscreens.
7
@ SPLIT button
# Press to switch to multi-screen display.
$
8
MUTING button
Press to mute the volume.
%
9
ID NO. SET button
Press to video wall.
0
AUTO SET UP button
When using computer signal input, automatically
sets the [POSITION], [CLOCK] and [PHASE] to
optimum values.
-
STANDBY/ON button
Press to put the unit in operation or standby mode.
=
DISPLAY button
Press to view the unit's current input and setup
mode.
~
POINT ZOOM button
Use to select and enlarge one part of the screen.
!
FREEZE button
When memo screen function is enabled, a still
image is displayed in the subscreen.
@
SWAP button
During multi-screen display, use this button to
switch between main screen and subscreen.
#
PIP SHIFT button
When using PinP mode with multi-screen display,
use this button to move the position of subscreen.
$
VOLUME (+/–) buttons
Use to adjust the volume.
%
CLEAR button
Press to clear for program timer and ID assignment.