Controls And Connectors - Pioneer PDP-425CMX Technical Manual

Controls and Connectors

2.3 Controls and Connectors
Main unit
Operation panel on the
main unit
DISPLAY
STANDBY/ON MENU
/ SET
6 7 8
Main unit
1
Display stand
2
Remote control sensor
Point the remote control toward the remote sensor
to operate the unit.
3
Ambient light sensor
This sensor measures the level of light inside the
viewing room; it is enabled when the [ENERGY
SAVE] option is set to [AUTO].
4
STANDBY/ON indicator
When the unit is operating:
The indicator lights green.
When flashing, the indicator is used to indicate
error messages.
The indicator flashes green once every one second
when the [POWER MGT.] function is operating.
When the unit is in standby mode:
The indicator lights red.
When flashing, the indicator is used to indicate
error messages.
5
Handles
12
Main unit
INPUT SCREEN SIZE – VOL +
9 0 -
5
1
Operation panel on the main unit
6
STANDBY/ON button ( )
Press to put the display in operation or standby
mode.
7
MENU button
Press to open and close the on-screen menu.
8
DISPLAY/SET button
Use to confirm onscreen menu selections, and to
change settings.
When not indicated by onscreen menus, used to
display the current set status.
9
NPUT (') button
Except when menu screen is displayed, this button
operates to change the input.
0
SCREEN SIZE (') button
Except when menu screen is displayed, this button
operates to change the screen size.
-
VOL +/– (}/]) buttons
When not indicated for use in onscreen menu
items, these buttons are used for adjusting the
sound volume.
2
STANDBY
ON
3 4