Subscreen Mode Setting - Pioneer PDP-425CMX Technical Manual

Menu Mode

18) Subscreen Mode Setting

During picture-in-picture display, if no subscreen input signal is detected, the black borders of the subscreen are
automatically turned off.
The subscreen mode function is disabled during side-by-side display.
* The lack of a subscreen input signal means there is no video signal or sync signal.
Factory setting: ACTIVE
1 Select 'OPTION'.
2 Place the cursor on 'PIP DETECT', and press the [SET]
button to change the setting.
Each time the [SET] button is pressed, the setting changes
as shown below.
3 ACTIVE
INACTIVE 2
• ACTIVE ...... When no subscreen input signal is detected
during multiscreen display, the black border
of the subscreen will disappear after 3
seconds.
• INACTIVE .. Subscreens with no input will be left with
the black border visible.
The 'PIP DETECT' setting is common for all inputs.
132
Screen 2
M E N U
P I C T U R E S C R E E N
L A N G U A G E
E N E R G Y S AV E
T I M E R S E T T I N G
S C R E E N M G T.
A U T O S E T U P M O D E
A U T O F U N C T I O N
P I P D E T E C T
S P L I T F R E E Z E
SET
CHANGE
I N P U T 1
S E T U P O P T I O N
: E N G L I S H
: S TA N D A R D
: I N A C T I V E
: O F F
: A C T I V E
: O F F
MENU
EXIT