Detection Interval; Stun Server; Stun Server Address; Stun Server Port - Panasonic KX-UT670 Administrator's Manual

Section 4 Web User Interface Programming
Default Value

Detection Interval

Description
Value Range
Default Value

4.4.4.2 STUN Server

STUN Server Address

Description
Value Range
Default Value
Configuration File Reference

STUN Server Port

Description
Value Range
Default Value
Configuration File Reference

4.4.5 Static NAPT Settings

This screen allows you to configure the NAPT (Network Address Port Translation) settings. If the unit is
connected behind a router that uses NAT/NAPT to translate between private and global IP addresses, VoIP
80 Administrator Guide
STUN
Specifies the interval, in seconds, to wait between attempts to detect
the global IP address.
0, 10–65535 (0: Disable)
Note
•
When [Detection Method] is set to [SIP], the value "0" disables
detection and a value other than "0" enables detection.
0
Specifies the IP address or FQDN of the STUN server.
Max. 127 characters
Not stored.
STUN_SERV_ADDR (Page 157)
Specifies the port number of the STUN server.
1–65535
3478
STUN_SERV_PORT (Page 158)
Document Version 2012-07