4.7.3 Tone Settings
This screen allows you to configure the dual-tone frequencies and ringtone patterns of each tone.
4.7.3.1 Dial Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Document Version 2012-07
Specifies the dual-tone frequencies, in hertz, of dial tones using 2 whole
numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
350,440
DIAL_TONE1_FRQ (Page 166)
Specifies the pattern, in milliseconds, of dial tones using up to 10 whole
numbers (off 1, on 1, off 2, on 2...) separated by commas.
Section 4 Web User Interface Programming
Administrator Guide
117