Backup And Restore - Panasonic KX-UT670 Administrator's Manual

Section 8 Backup and Restore

8.1 Backup and Restore

You can back up user data (including Web programming settings) to an SD card, or restore data from the SD
card.
Only the built-in applications are stored on the SD card. Third-party applications cannot be backed up.
The data is saved onto the SD card as follows:
Folder name
Backup data file name
Backup information file name
Notice
•
It is the user's responsibility to ensure that the backup data saved on the SD card is kept secure.
To Back Up Data to an SD Card
1.
Press
2.
Tap [Administration], enter the administrator password, and then tap [OK].
3.
Tap [Backup and Restore].
4.
Tap [Backup data to SD card].
5.
On the backup confirmation window, tap [OK].
6.
Enter the new password for backup, and enter it again for confirmation.
7.
When the completed message is displayed, tap [OK].
Note
•
Backup can be performed only when the unit is idle. Also, the unit cannot receive calls during the
backup.
•
Only 1 backup file can be stored on the SD card. If the SD card contains a backup file, the existing file
is overwritten.
•
The password must consist of 8 or more ASCII characters (case-sensitive) (® see Entering
Characters in 4.2.4 Accessing the Web User Interface). Backup can also be performed without
requiring a password.
•
If you press
To Restore Data from the SD Card
1.
Press
2.
Tap [Administration], enter the administrator password, and then tap [OK].
3.
Tap [Backup and Restore].
4.
Tap [Restore data from SD card].
5.
Enter the password that was set when the data was stored.
6.
On the restore confirmation window, tap [OK].
224 Administrator Guide
/sdcard/kx-ut670
YYYYMMDDHHMM(UTC)_backup.dat
Note
•
The time stamp of the backup data file will be in UTC, regardless
of the time zone setting.
bkinfo.dat
on the Home screen, and then tap [Settings].
during the backup, the backup will be canceled.
on the Home screen, and then tap [Settings].
Document Version 2012-07