Section 4 Web User Interface Programming
Default Value
Configuration File Reference
4.6.2.11 SIP extensions
Supports 100rel (RFC 3262)
Description
Value Range
Default Value
Configuration File Reference
Supports Session Timer (RFC 4028)
Description
Value Range
Default Value
Configuration File Reference
4.6.2.12 NAT Identity
Keep Alive Interval
Description
Value Range
Default Value
Configuration File Reference
96
Administrator Guide
0
DSCP_SIP_n (Page 193)
Selects whether to add the option tag 100rel to the "Supported" header
of the INVITE message. For details, refer to RFC 3262.
•
Yes
•
No
Note
•
If you select [Yes], the Reliability of Provisional Responses
function will be enabled. The option tag 100rel will be added to
the "Supported" header of the INVITE message and to the
"Require" header of the "1xx" provisional message. If you select
[No], the option tag 100rel will not be used.
No
SIP_100REL_ENABLE_n (Page 198)
Specifies the length of time, in seconds, that the unit waits before
terminating SIP sessions when no reply to repeated requests is
received. For details, refer to RFC 4028.
0, 60–65535 (0: Disable)
0
SIP_SESSION_TIME_n (Page 193)
Specifies the interval, in seconds, between transmissions of the Keep
Alive packet to the unit in order to maintain the NAT binding information.
Note
•
This setting is available only when [Transport Protocol] is set
to [UDP].
0, 10–300 (0: Disable)
0
PORT_PUNCH_INTVL_n (Page 201)
Document Version 2012-07